 |
The Dixon Bros Racing Long Travel Suspension for 95-07 Ford Rangers offers 14" of travel with 4WD. It requires fiberglass fender to prevent rubbing.
Includes
- 14" of usable wheel travel with 4wd
- 4" wider per side
- Extended axles with custom high angle CVs
- New Cr-Mo (4130) tube upper control arm, with high-angle balljoint (over 20 degrees more than a uniball)
- New boxed plate lower control arm
- Uses 8" stroke coilover shocks, not included (replaces torsion bars)
- Weld-in shock hoop available for most common shock brands
- Retains factory alignment (Caster & Camber)
- Optional Hydraulic Bumpstop Mount
- Optional steering clevis kit available
Dixon Bros Racing
|
|
|
 |
The Camburg Long Travel Suspension for Chevy Silverados offers Boxed lower arms, Billet aluminum upper arms (now hard anodized black for excellent corrosion resistance), spindles, steering, Heims, limit straps, and Brake lines. Needed but not included are coil-over mounts, coil-over shocks and fiberglass fenders. The kit will cycle through 20" of travel but is limited to prevent rubbing of the core support to 16"
Includes
- fully fabricated spindle
- boxed lower arm with internal gusseting
- billet aluminum upper arms
- 1"Uni-Ball lower pivots for the lower A-Arms
- 3/4" heims for the upper arm
Camburg Offroad Engineering
|
|
 |
The Camburg Long Travel Suspension for Chevy Silverados offers Upper arms, Lower Boxed arms, CNC and boxed spindle, All heims and uni-balls with spacers, powder coated. Sway-A-Way 2.5" coil overs with Eibach springs, FOX
Air-bumps, Limit straps. Custom steering upgrade also included. Needed but not included are fiberglass fenders. The kit will cycle through 17" of travel.
Includes
- Upper arms
- Lower Boxed arms
- CNC and boxed spindle
- Sway-A-Way 2.5" coil overs with Eibach springs
- FOX Air-bumps
- Limit straps
- Custom steering upgrade
Camburg Offroad Engineering
|
|
 |
The CST long travel kit for the 88-98 2WD Chevy/GMC 1/2 ton Fullsize Pickup give you 11" of travel, a 5" wider track width and clearance for 33" tires. Add fiberglass fenders and it will clear 35's
Includes
- +2.5" Wider Upper Control Arms
- +2.5" Wider Lower Control Arms
- Hi-Misalignment Upper Balljoints
- Hi-Misalignment Lower Balljoints
- Delrin Upper Arm Bushings
- Urethane Lower Arm Bushings
- Zinc Plated Steering Extension
- Weld-on Bumpstop mounts
- Urethane Bumpstops
CST Performance Suspensions
|
|
 |
The CST long travel kit for the 99-03 2WD Chevy/GMC 1/2 ton Fullsize Pickup give you 15" of travel, a 6" wider track width and clearance for 33" tires. Add fiberglass fenders and it will clear 35's
Includes
- +3" Wider Upper Control Arms
- +3" Wider Lower Control Arms
- Weld-on Shock Hoops
- Pre-installed 1" Uniballs
- Delrin Upper Arm Bushings
- Urethane Lower Arm Bushings
- Zinc Plated Steering Extension
- Bolt-on Bumpstop mounts
- Urethane Bumpstops
CST Performance Suspensions
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 2 of 2 |
