 |
| Body: |
2.0, 2.5 and 3.0 Tube Conventional or Threaded Body. |
| Rod: |
0.625", 0.875 and 1.0 Polished Nitrosteel. Airshock 1.25 Chromed shaft. |
| Rod Guide: |
Brass and Teflon coated bush. |
| Seal: |
Rebuildable dual Quad rings. |
| Piston: |
Radflo "Freeflo" Racing Piston. |
| Valving: |
5 and 6 stage Velocity Sensitive Independent Rebound & Compression. |
| Oil: |
"Radflo" Foam Resistant High Temperature Suspension Fluid. |
| Reservoir: |
2.0 and 2.5 Tube. |
| Hose: |
-6 and -8 High Pressure Hose. |
| Rod Ends: |
Com 8 and Com10 Bushed Teflon lined Spherical Plain with CNC Machined Rod Ends. 12mm also available. |
| Finish: |
Cadmium. |
| Dual Rate C/O Hardware: |
Aluminium Machined with Nylatron Spring Slider. |
Available for 2.5" and 3.0 coil springs.
Radflo Suspension Technology
|
|
|
 |
- The only off-road shock company that offers their own springs
- The largest selection of off-road springs available anywhere
- Over 5000 springs in stock and ready for delivery
-
- King only manufactures off-road dedicated springs
- Available for King and all other shocks
- Available in 2.50, 3.00, 3.75 ID
- Available from 4 to 24 lengths
- Weight range from 90lb to 800lb
King Off-road Racing Shocks
|
|
 |
- + - .001 honed cylinder bores
- 7075 hard anodized aluminum piston
- Special piston prevents valve breakage
- High carbon, heat-treated steel shaft
- Special urethane long-life seals
- Heat treated stainless steel valving
- Teflon lined stainless spherical bearings
- King off-road specific springs
- Available rubber bushings for spherical bearing alignment
- Available Lengths from 6" - 16"
King Off-road Racing Shocks
|
|
 |
- Smooth-bore seamless alloy body
- CAD designed pistons - high flow, low cavitation / tuneable velocity sensitive valving
- Clamp Style Mounting
- Shafts are 1.25" chromoloy tubing - hard chomed
- Must be run body side up
- Nitrogen gas pressurized to 200PSI
Fox Racing Shox
|
|
 |
- Smooth-bore seamless alloy body
- CAD designed pistons - high flow, low cavitation / tuneable velocity sensitive valving
- Shafts are hardened 17-4 stainless steel 7/8" hard chomed
- Billet aluminum body caps / eyelets
- Can be run at any angle
- Nitrogen gas pressurized to 150-200PSI
Fox Racing Shox
|
|
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
