Radflo Suspension Technology Coilover Shocks

Body: 2.0, 2.5 and 3.0 Tube Conventional or Threaded Body. Rod: 0.625", 0.875” and 1.0” Polished Nitrosteel. Airshock 1.25” Chromed shaft. Rod Guide: Brass and Teflon coated bush. Seal: Rebuildable dual Quad rings. Piston: Radflo "Freeflo" Racing Piston. Valving: 5 and 6 stage Velocity Sensitive Independent Rebound & Compression. Oil: "Radflo" Foam Resistant High Temperature Suspension Fluid. Reservoir: 2.0” and 2.5” Tube. Hose: -6 and -8 High Pressure Hose. Rod Ends: Com 8 and Com10 Bushed Teflon lined Spherical Plain with CNC Machined Rod Ends. 12mm also available. Finish: Cadmium. Dual Rate C/O Hardware: Aluminium Machined with Nylatron Spring Slider.
Read More

King Off-road Racing Shocks Coil Springs

The only off-road shock company that offers their own springs The largest selection of off-road springs available anywhere Over 5000 springs in stock and ready for delivery King only manufactures off-road dedicated springs Available for King and all other shocks Available in 2.50”, 3.00”, 3.75” ID Available from 4” to 24” lengths Weight range from 90lb to 800lb King Off-road Racing Shocks
Read More

King Off-road Racing Shocks 2.0 Remote Reservoir Coilover Shocks

+ – .001 honed cylinder bores 7075 hard anodized aluminum piston Special piston prevents valve breakage High carbon, heat-treated steel shaft Special urethane long-life seals Heat treated stainless steel valving Teflon lined stainless spherical bearings King off-road specific springs Available rubber bushings for spherical bearing alignment Available Lengths from 6" – 16" King Off-road Racing Shocks
Read More

Fox Racing Shox 2.0 Air Bump Stops

Smooth-bore seamless alloy body CAD designed pistons – high flow, low cavitation / tuneable velocity sensitive valving Clamp Style Mounting Shafts are 1.25" chromoloy tubing – hard chomed Must be run body side up Nitrogen gas pressurized to 200PSI Fox Racing Shox
Read More

Fox Racing Shox 2.5 Remote Reservoir Coil-over Shocks

Smooth-bore seamless alloy body CAD designed pistons – high flow, low cavitation / tuneable velocity sensitive valving Shafts are hardened 17-4 stainless steel 7/8" hard chomed Billet aluminum body caps / eyelets Can be run at any angle Nitrogen gas pressurized to 150-200PSI Fox Racing Shox
Read More

Fox Racing Shox 2.0 2 Tube Piggyback Bypass Shocks

Smooth-bore seamless alloy body CAD designed pistons – high flow, low cavitation / tuneable velocity sensitive valving Shafts are hardened 17-4 stainless steel 7/8" hard chomed Billet aluminum body caps / eyelets Can be run at any angle Nitrogen gas pressurized to 150-200PSI Fox Racing Shox
Read More